Ordering Guide and Accessories Xenus XSL User Guide
196 Copley Controls Corp.
H.4: Control and Feedback Cable Color Codes
H.4.1: Wire Description Nomenclature
Most wires are solid-color with a stripe of an alternate color, shown below as solid/stripe. For
instance, “Black/Orange” is a black wire with an orange stripe.
H.4.2: Control Cable (XSL-CC-10)
The molded connector mates with amplifier J7 and has flying-lead terminators with colors shown
in the table below.
Note the color changes affecting pins 1 and 2 between XSL-FC-10 Revision B and Revision C.
Signal Pin Color
(Body/ Stripe)
Pair Color
(Body/ Stripe)
Pin Signal
Shield 1 Rev A&B: White/Tan
Rev C: Brown
1a 8a White/Violet 14 [OUT2]
Signal Ground 2 Rev A&B: Tan/White
Rev C: Orange
1b 8b Violet/White 15 [OUT3]
Enable [IN1] 3 White/Brown 2a 9a White/Gray 16 Encoder A In/Out
GP Input [IN2] 4 Brown/White 2b 9b Gray/White 17 Encoder /A In/Out
GP Input [IN3] 5 White/Pink 3a 10a Tan/Brown 18 Encoder B In/Out
GP Input [IN4] 6 Pink/White 3b 10b Brown/Tan 19 Encoder /B In/Out
HS Input [IN6] 7 White/Orange 4a 11a Tan/Pink 20 Encoder X In/Out
HS Input [IN7] 8 Orange/White 4b 11b Pink/Tan 21 Encoder /X In/Out
HS Input [IN8] 9 White/Yellow 5a 12a Tan/Orange 22 +5 Vdc @ 400 mA
HS Input [IN9] 10 Yellow/White 5b 12b Orange/Tan 23 Signal Ground
HS Input [IN10] 11 White/Green 6a 13a Tan/Yellow 24 Analog Ref In(+)
GP Input [IN11] 12 Green/White 6b 13b Yellow/Tan 25 Analog Ref In(-)
[OUT1] 13 White/Blue 7 7b Blue/White 26 [IN12] GP Input
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
