Quick Setup with CME 2 Xenus XSL User Guide
96 Copley Controls Corp.
5.8.3: Custom Digital Outputs
5.8.3.1 Click Configure Custom ( ) to open Custom Output Configuration.
5.8.3.2 If needed, to deselect all events on the list, click Clear.
5.8.3.3 Choose any number of events from the list. (Selected events are OR’ed together, so
any event activates the output.)
5.8.3.4 To optionally latch the selected events, select Latch Output ( ). For more
information on latching, see Non-Latched and Latched Custom Outputs (p. 45).
5.8.3.5 Click OK to save changes to volatile memory and close the
Custom Output Configuration screen
OR
click Cancel to close the screen without saving changes.
5.8.4: Save Input/Output Changes
5.8.4.1 On the Input/Output screen, click Close.
5.8.4.2 On the Main screen, click Save to Flash ( ).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
