Copley Controls Xenus XSL-230-40 - 4: Quick Copy Setup Procedure

Using CME 2 Xenus XSL User Guide
128 Copley Controls Corp.
6.2.4: Quick Copy Setup Procedure
Use this procedure to configure an amplifier/motor pair by copying a .ccx file that was prepared for
the amplifier/motor combination.
6.2.4.1 M
ake sure the amplifier is connected to the PC using the J5 RS-232 connector.
For wiring instructions, see RS-232 Serial Communications (J5) (p. 66).
6.2.4.2 Start CME 2 by double-clicking the CME 2 shortcut icon on the Windows desktop:
6.2.4.3 On the Main screen, click Restore amplifier data from disk ( ).
6.2.4.4 When prompted, navigate to the folder containing the appropriate .ccx file.
Highlight the file name and then click Open to load the file data into volatile memory.
6.2.4.5 On the Main screen, click Save to Flash ( ) to commit the new settings to flash
memory.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com