Copley Controls Xenus XSL-230-40 - 6: Regen Resistor; Command Input

Quick Setup with CME 2 Xenus XSL User Guide
98 Copley Controls Corp.
5.8.6: Regen Resistor
For more information on the external regen resistor, see Regen Resistor Theory (p. 47), and
Regen Resistor Sizing and Configuration (p. 153).
5.8.6.1 Click Configure Regen ( ) to open the Regen Resistor screen.
5.8.6.2 Select a resistor option.
Option Description
None No external regen resistor is used.
XSL-RA-01
XSL-RA-02
Standard regen resistors supplied by Copley Controls.
Custom Resistor User-supplied resistor. See Regen Resistor Sizing and Configuration (p. 153).
5.8.6.3 Click OK to save regen settings to flash memory and close the Regen Resistor screen
OR
click Cancel to restore to previous values and close the screen.
5.9: Command Input
Choose the appropriate step for the input format.
Input Format Step
Analog Analog Input (p. 99)
PWM PWM Input (p. 101)
Digital Position Digital Position Input (p. 102)
CAN CAN Interface (p. 104)
ASCII Contact Customer Support.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com