Quick Setup with CME 2 Xenus XSL User Guide
80 Copley Controls Corp.
5.2.4: Serial Port Setup
One or more serial ports on a PC can be used to connect amplifiers. Use the following instructions
to add (enable) ports for amplifiers, to choose baud rates for those ports, and to remove (disable)
ports for amplifiers.
5.2.4.1 Start CME 2 by double-clicking the CME 2 shortcut icon on the Windows desktop:
If a serial port has not been selected, the Select Devices screen appears.
5.2.4.2 If the CME 2 Main screen appears instead of Select Devices,
choose ToolsCommunications Wizard.
5.2.4.3 From the Available Devices list on the Select Devices screen, choose the serial ports
that will be used to connect to amplifiers.
1 To allow connection of an amplifier through a port, highlight the port name and click
Add (or click Add All to enable all available ports).
2 To remove a port from the Selected Devices list, highlight the port name and click
Remove.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
