Copley Controls Xenus XSL-230-40 - Motor Feedback (J8)

Wiring Xenus XSL User Guide
72 Copley Controls Corp.
4.8: Motor Feedback (J8)
Mating Connector
Description Manufacturer PN Wire Size
20 Position, .050" Mini D Ribbon (MDR) Connector 3M 10120-3000 VE
standard
Molex 54306-2019
rugged
24 - 30 AWG
20 position, .050" mini D Connector, molded
Insulation Displacement (IDC) style
Plug assembly:
Molex 52316-2011
Boot cover:
Molex 52370-2010
28 AWG
Back shell 3M: 10320-52F0-008
standard
Molex 54331-0201
rugged
Standard solder style connector included in Connector Kit PN XSL-CK
10 foot cable assembly included in Connector Kit PN XSL-CA uses molded IDC style connector
NOTE: For color codes, see Control and Feedback Cable Color Codes (p. 196).
Pin connections are shown here:
1
10
11
20
J8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com