Copley Controls Xenus XSL-230-40 - G.1.2: Servotube Motor;Feedback Setup

Xenus XSL User Guide ServoTube Motor Setup
Copley Controls Corp. 187
G.1.2: ServoTube Motor/Feedback Setup
G.1.2.1 On the CME 2 Main screen, click Motor/Feedback ( ) to open the
Motor/Feedback-Rotary Motor screen.
G.1.2.2 In the Manufacturer field, choose Copley Motion Systems from the pull-down list.
G.1.2.3 In the Series field choose STA or STB to match the ServoTube motor.
G.1.2.4 In the Model field, choose the model number to match the ServoTube motor.
G.1.2.5 Click the Feedback tab and verify the Analog Feedback settings (defaults shown
below).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com