Xenus XSL User Guide Quick Setup with CME 2
Copley Controls Corp. 81
5.2.4.4 C
lick Next to save the choices and open the Configure Serial Ports screen (or click
Cancel to close the screen without saving changes).
5.2.4.5 Configure the selected ports.
1 Highlight a port in the Selected Devices list.
2 Choose a Baud Rate for that port.
3 Repeat for each selected port.
5.2.4.6 Click Next to save the choices and open the Serial Ports Settings Review screen (or
click Cancel to close the screen without saving changes).
5.2.4.7 Review the settings. To make a change, click Back. To accept the settings, click
Finish. To close without saving changes, click Cancel.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
