Quick Setup with CME 2 Xenus XSL User Guide
86 Copley Controls Corp.
5.5: Motor Setup
There are three methods for performing motor setup. Choose the appropriate method and perform
the steps described.
Method Step
Load motor data from file (.ccm) Motor Data File (p. 86)
Enter rotary motor data Rotary Motor (p. 87)
Enter linear motor data Linear Motor (p. 88
5.5.1: Motor Data File
5.5.1.1 To download motor data files from the website:
1 In an internet browser, navigate to
http://www.copleycontrols.com/Motion/Downloads/motorData.html
2 Click on the appropriate motor name.
3 When prompted, save the file to the MotorData folder in the CME 2 installation
folder.
4 (The default installation folder is
C:\Program Files\Copley Motion\CME 2\MotorData.)
5 Extract the contents of the zip file to the same location.
6 The folder should now contain the new motor data file (with a .ccm filename
extension).
7 If desired, delete the .zip file to save disk space.
5.5.1.2 To load motor data from a motor data file
1 Click Motor/Feedback ( ) to open the Motor/Feedback screen.
2 On the Motor/Feedback screen, click Restore Motor Data from Disk ( ).
When prompted, navigate to the folder containing the file,
then click on the file name, and then click Open.
3 Proceed to Calculate (p. 92).
OR
to return to the Main screen without restoring motor data, click Cancel.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
