2C9
1-4-47
Photo processing
Select the image processing method for photo origi-
nals.
1. Select "F11" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 (error diffusion)/2 (dithering)
Setting this to error diffusion when copying originals
with text and photo and dithering when copying
originals with mainly photos.
Ground color adjustment
The ground color adjusting after copying.
1. Select "F12" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 (lightest) to 5 (darkest)
Paper selection
Select the auto paper select function based on the orig-
inal size or priority cassette selection.
1. Select "F13" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 (auto paper selection)/
2 (selected drawer)
Selected drawer
Selects the drawer that is to be automatically be given
priority for use.
1. Select "F14" and press the enter key.
2. Select the default drawer and press the enter key.
Setting range: 1 (drawer)/2 (first paper feeder)/ 3
(second paper feeder)/4 (third paper feeder)
Note: This setting item will not be displayed if no
optional paper feeder is installed.
Auto drawer switching
Sets whether the auto drawer switching function is
available.
1. Select "F15" and press the enter key.
2. Select "ON" or "OFF" and press the enter key. Set-
ting range: ON (enabled)/OFF (disabled)
Note: This setting item will not be displayed if no
optional paper feeder is installed.
AMS mode
Selects whether auto magnification selection or 100%
magnification is to be given priority when the sizes of
the original and copy paper are different.
1. Select "F16" and press the enter key.
2. Select "ON" or "OFF" and press the enter key.
Setting range: ON (enabled)/OFF (disabled)
Drawer paper size (drawer 1)
Sets the paper size for the drawer so that it will be
automatically selected.
1. Select "F17" and press the enter key.
2. Select the paper size and press the enter key.
Setting range: AtC (auto detection metric)/ AtI (auto
detection inch)/o2r (oficio2)
Drawer paper size (drawer 2)
Sets the paper size for the first paper feeder so that it
will be automatically selected.
1. Select "F18" and press the enter key.
2. Select the paper size and press the enter key.
Setting range: AtC (auto detection metric)/ AtI (auto
detection inch)/o2r (oficio2)
Note: This setting item will not be displayed if no
optional paper feeder is installed.
Drawer paper size (drawer 3)
Sets the paper size for the second paper feeder so that
it will be automatically selected.
1. Select "F19" and press the enter key.
2. Select the paper size and press the enter key.
Setting range: AtC (auto detection metric)/ AtI (auto
detection inch)/o2r (oficio2)
Note: This setting item will not be displayed if no
optional paper feeder is installed.
Drawer paper size (drawer 4)
Sets the paper size for the third paper feeder so that it
will be automatically selected.
1. Select "F20" and press the enter key.
2. Select the paper size and press the enter key.
Setting range: AtC (auto detection metric)/ AtI (auto
detection inch)/o2r (oficio2)
Note: This setting item will not be displayed if no
optional paper feeder is installed.
Bypass tray paper size
Sets the paper size for the bypass tray so that it will be
automatically selected.
1. Select "F21" and press the enter key.
2. Select the paper size and press the enter key.
Setting range: Uni (universal size)/A3r (A3/ 11" x
17")/A4r (A4/8
1/2" x 11")/A4E (A4 vertical/11" x 8 1/
2
")/A5r (A5/5 1/2" x 8 1/2")/ b4r (B4/81/2" x 14")/b5r
(B5)/Cu1 (custom 1)/ Cu2 (custom 2)
Custom 1 size
Sets the size of the paper to be set to the custom 1
size.
1. Select "F22" and press the enter key.
2. Select the paper size and press the enter key.
Setting range: b6r (B6)/A6r (A6)/Pos (postcard)/Ldr
(ledger/11" x 17")/Lgr (legal/ 8
1/2" x 14")/Ltr (letter/
8
1/2" x 11")/LtE (letter vertical/11" x 8 1/2")/Str
(statement)/o2r (oficio2)/CPF (11" x 15")/InP (irreg-
ular size)
To Next Page
Loading...
