2C9-6.0
1-3-5
1-3-2 Setting initial copy modes
Factory settings are as follows:
Maintenance
item No.
Contents Factory setting
U253 Switching between double and single counts Double count
U254 Turning auto start function on/off ON
U255 Setting auto clear time 90s
U258 Switching copy operation at toner empty detection SINGLE MODE
U260 Changing the copy count timing After ejection
U342 Setting the ejection restriction ON
U343 Switching between duplex/simplex copy mode Simplex copy
U344 Setting preheat/energy saver mode ENERGY STAR
To Next Page
Loading...
