2C9
1-4-46
(2) Setting department management items
Management on/off setting
1. Select "d01" and press the enter key.
2. Select "ON" or "OFF" and press the enter key.
Setting range: ON (set)/OFF (no setting)
Management code registration
1. Select "d02" and press the enter key.
2. Enter a department code using the numeric keys
and press the enter key.
Setting range: 0 to 99999999
Management code deletion
1. Select "d03" and press the enter key.
2. Enter the department code to be deleted using the
numeric keys
3. Select "YES" or "NO" and press the enter key.
Setting range: YES (delete)/NO (no deletion)
Clearing management count
1. Select "d04" and press the enter key.
2. Select "YES" or "NO" and press the enter key.
Setting range: YES (clear)/NO (do not clear)
Outputing the management list
1. Select "d05" and press the enter key. If A4/11" x
8
1/2" paper is present, the list is automatically
printed out. Otherwise, select the paper source and
press the start key.
(3) Copy default
User status report
Prints the details of the default settings.
1. Select "F01" and press the enter key. If A4/11" x
8
1/2" paper is present, the list is automatically
printed out.
Otherwise, select the paper source and press the
start key.
Original image quality
Selects the image quality at power-on.
1. Select "F02" and press the enter key.
2. Select the image mode and press the enter key.
Setting range: 1 (text & photo)/2 (photo)/ 3 (text)
Exposure mode
Selects the exposure mode at power-on.
1. Select "F03" and press the enter key.
2. Select the exposure mode and press the enter key.
Setting range: 1 (manual)/2 (auto)
Eco-copy
Selects the eco-copy mode at power-on.
1. Select "F04" and press the enter key.
2. Select "ON" or "OFF" and press the enter key.
Setting range: ON (enabled)/OFF (disabled)
Exposure steps
Sets the number of exposure steps for the manual
exposure mode.
1. Select "F05" and press the enter key.
2. Select "1 step" or "0.5 step" and press the enter
key.
Setting range: 1 (1 step)/2 (0.5 step)
Auto exposure adjustment
Adjusts the exposure for the auto exposure mode.
1. Select "F06" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 (lightest) to 7 (darkest)
Text and photo mode exposure adjustment
Adjusts the exposure to be used when text and photo
original is selected for the image mode.
1. Select "F07" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 (lightest) to 7 (darkest)
Photo exposure adjustment
Adjusts the exposure to be used when photo original is
selected for the image mode.
1. Select "F08" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 (lightest) to 7 (darkest)
Text exposure adjustment
Adjusts the exposure to be used when text original is
selected for the image mode.
1. Select "F09" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 (lightest) to 7 (darkest)
Black-line correction
Reduces black lines that may be caused when the DP
is used.
1. Select "F10" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 (off)/2 (weak)/3 (strong)
To Next Page
Loading...
