Cosman G4 - Page 30

Cosman G4 Radiofrequency Generator Service Manual (SPI 11291 Rev A)
8.2.1 Additional Example Screens
The Graphing Thermal RF screen will appear differently depending on the current settings:
• Electrode Setup settings (see Section 7.1)
• Thermal RF Mode: Standard or Stepped (see Section 8.2.2)
Temperature Readings:
One Temperature reading
from each electrode in
bipolar pair. For instance,
“E1” indicates a reading
from Electrode 1.
Electrode Panel (Black area):
Displays all readings for the
indicated bipolar electrode pair,
e.g. “Electrode 1+2”.
Standard Mode
One Electrode
Standard Mode
One Bi
p
olar Pai
r
Bipolar readings: Voltage,
Current, Power, and Impedance
between the two electrodes in
the bi
p
olar
p
ai
r
Stepped Mode
One Electrode
Time
r
: Cannot be reset
in Stepped Mode.
Section 8