Cosmote Speedport Plus 2 User Manual

44
5.7.1 Add IP Filter
This screen can be used to add rules for IP Filter. When you have finished
configuring your settings, confirm the changes by clicking the Apply button.
Click the Cancel button if you do not want to save your changes.
Figure 5-13 Add IP Filter
Table 5-7 Parameters for IP Filter
Parameter
Description
Source IP
Start IP address of the source.
Source IP End
End IP address of the source.
Source Port
Enter the start/end source port.
Destination IP
Enter the addresses for Start destination IP.
Empty value is allowed.

Cosmote Speedport Plus 2 Specifications

General

Brand	Cosmote
Model	Speedport Plus 2
Category	Network Router
Language	English