CP Plus CP-UNR-1xxQ1 Series - Page 102

94
Figure 5-64
After completing all the setting please click save button.
In one window display mode, right click mouse (click “Fn” Button in the front panel or click “Fn”
key in the remote control).
Click Pan/Tilt/Zoom, the interface is shown as below. See Figure 5-65.
Here you can set the following items:
 Step: value ranges fro 1 to 8.
 Zoom
 Focus
 Iris
Please click icon and to adjust zoom, focus and iris.
Figure 5-65
In Figure 5-65, please click direction arrows to adjust PTZ position. There are total 8 direction
arrows.
Figure 5-66