Transparent COM: Network user can communicate with
RS232 COM device.
PTZ matrix: PTZ matrix protocol. You can use the device to
control the PTZ matrix.
The value ranges from 5 to 8.
There are three options: 1/2.
You can select corresponding baud bit here.
There are five options: none/odd /even/mark/space.
7.4.3.5 Network
Network interface is shown as in Figure 7-28.
Figure 7-28 Network
Please refer to the following sheet for detailed information.
There are two options: IPv4 and IPv6. Right now, system
supports these two IP address format and you can access via
them.
The host in the LAN can get a unique MAC address. It is for
you to access in the LAN. It is read-only.
To Next Page
Loading...