CP Plus CP-UNR-1xxQ1 Series - CP-UNR-3 Xxt2 P Series

38
Port Name
Connection
Function
alarm device.
 NO：Normal open alarm output port.
 C：Alarm output public end.
A
RS485
(RS-485)
communication
port
RS485_A port. It is the cable A. You can
connect to the control devices such as speed
dome PTZ.
B
RS485_B.It is the cable B. You can connect
to the control devices such as speed dome
PTZ.
Power input
port
/
Input 12V DC.
Power button
/
Power on/off button.
VIDEO OUT
Video input
port
/
CVBS output
MIC IN
Audio input
port
/
Bidirectional talk input port. It is to receive the
analog audio signal output from the devices
such as mike phone, pickup.
MIC OUT
Audio output
port
/
Audio output port. It is to output the analog
audio signal to the devices such as the sound
box.
 Bidirectional talk output.
 Audio output on 1-window video monitor.
 Audio output on 1-window video
playback.
2.2.9 CP-UNR-3xxT2P Series
The CP-UNR-3xxT2P series rear panel is shown as below. See Figure 2-20.
Figure 2-20
Please refer to the following sheet for detailed information.
Port Name
Connection
Function
USB2.0
USB2.0 port.
/
Connect to USB2.0 mouse.
Network port
/
10M/100M/1000Mbps self-adaptive Ethernet
port. Connect to the network cable.
RS232
RS232 debug
COM.
/
It is for general COM debug to configure IP
address or transfer transparent COM data.