Click Set button, system pops up a dialogue box shown as in Figure
7-26.
Here you can set holiday date. Check the box, it means current channel
shall record as your holiday setup. Please go to the Period interface to
set the holiday date record setup.
It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels. The interface is shown as in Figure 7-25.
7.4.3.4 RS232
The RS232 interface is shown as in Figure 7-27.
Figure 7-27 RS232
Please refer to the following sheet for detailed information.
There is only one option COM 01, corresponding to RS232.
Control keyboard: Switch between RS232 and control
keyboard.
Network keyboard: COM control protocol. You can use
network keyboard to control NVR via COM.
To Next Page
Loading...