CP Plus CP-UNR-1xxQ1 Series - CP-UNR-3 Xxq2 P-XU Series

26
Port Name
Connection
Function
C1 to C3
2:port NO2～C2,Group 3:port
NO3～C3）).Output alarm signal to
the alarm device. Please make
sure there is power to the external
alarm device.
 NO：Normal open alarm output port.
 C：Alarm output public end.
A
RS485 (RS-485)
communication port
RS485_A port. It is the cable A. You
can connect to the control devices such
as speed dome PTZ.
B
RS485_B.It is the cable B. You can
connect to the control devices such as
speed dome PTZ.
Power input port
/
Input 12V DC.
Power button
/
/
Power on/off button.
2.2.3 CP-UNR-3xxQ2P-XU Series
The rear panel is shown as below. See Figure 2-12.
Figure 2-12
Please refer to the following sheet for detailed information.
Port Name
Connection
Function
USB2.0 port.
Connect to USB2.0 mouse.
Network port
10M/100M/1000Mbps self-adaptive Ethernet
port. Connect to the network cable.
RS232(RS-422)
232 debug
COM.
It is for general COM debug to configure IP
address or transfer transparent COM data.
HDMI
High Definition
Media
Interface
High definition audio and video signal output
port. It transmits uncompressed high
definition video and multiple-channel data to
the HDMI port of the display device.
VGA
VGA video
output port
VGA
VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.