CP Plus CP-UNR-1xxQ1 Series - Rear Panel Connectivity

24
Record light
1-16
For 4/8/16 channel device: indication light on means that the
channel is in recording.
For 32 channel device, channel 17-32 reuse the indication light 1
to 16. For example, the first indication light has the following four
statuses:
 The first indication light flashes slowly when the 1-channel is
recording while the 17-channel does not record.
 The firs indication light flashes quickly when the 1-channel
does not record while the 17-channel is recording.
 The first indication light is on when the 1-channel is
recording and the 17-channel is recording.
 The first indication light is off when the 1-channel does not
record and the 17-channel does not record.
Remote control
indication light
ACT
Remote control indication light
Status indication
light
Status
If there is Fn indication light, current status indication light is null.
Power indication
light
PWR
Power indication light
2.1 Rear Panel
2.2.1 CP-UNR-1xxQ1_ CP-UNR-1xxQ1P Series
The CP-UNR-1xxQ1P series rear panel is shown as below. See Figure 2-9.
Figure 2-9
The CP-UNR-1xxQ1P series rear panel is shown as below. See Figure 2-10.
Figure 2-10