CP Plus CP-UNR-1xxQ1 Series - System Menu; Monitor Window Switch

119
Parameter
Function
Display device
information
 1: NVR IP address.
 2: Channel number.
 3: Bit stream.
 4: Bit stream decode type.
 S1: Overlay.
 S2: Off stream.
 S3:GD1
 H1: Overlay
 H2: off stream decoding from the display card.
Digital zoom
Click this button and then left drag the mouse in the zone
to zoom in. Right click mouse system restores original
status.
Change show
mode
Resize or switch to full screen mode.
Local record
When you click local record button, the system begins
recording. The recorded file is saved to system folder: \
RecordDownload(default).
Snapshot
You can snapshoot important video. All images are
memorized in system folder: \ picture download (default).
Audio
Turn on or off audio.
Close video
Close video in current window.
7.2.3 System Menu
System menu is shown as in Figure 7-7.
Please refer to chapter 7.4 Configuration, chapter 7.5 Search, chapter 7.6 Alarm, chapter 7.7
About, chapter 7.8 Log out for detailed information.
Figure 7-7 System Menu
7.2.4 Monitor Window Switch
The monitor window switch interface is shown as in Figure 7-8.
Figure 7-8 Monitor Window Switch
System supports 1/4/6/8/9/13/16/20/25/36-window real-time preview.
----It is video quality adjustment button. It has relationship with decode via software.
--Fluency button. You can use this function to adjust the priority between real-time and
fluency.