You can click this button to enable audio talk. Click 【▼】 to
select bidirectional talk mode. There are four options: DEFAULT，
G711a，G711u and PCM.
Please note, the audio input port from the device to the client-end
is using the first channel audio input port. During the bidirectional
talk process, system will not encode the audio data from the
1-channel.
The Web can playback the saved (Extension name is dav) files in
the PC-end.
Click local play button, system pops up the following interface for
you to select local play file. See Figure 7-5.
Figure 7-5
Click this button to refresh monitor channel name.
Please left click one monitor to view real-time video, the monitor window is shown as in Figure
7-6.
Figure 7-6 Real-time Monitor
Please refer to the following sheet for monitor window parameter information.
To Next Page
Loading...