CP Plus CP-UNR-1xxQ1 Series - CP-UNR-2 Xxq2;Cp-UNR-2 Xxq2 P;Cp-UNR-2 Xxq4;Cp-UNR-2 Xxq4 P Series

47
3.3 CP-UNR-2xxQ2/CP-UNR-2xxQ2P/CP-UNR-2xxQ4/CP-UNR-2xxQ4P
Series
3.4 CP-UNR-4xxQ8-XU/ CP-UNR-3xxT8 Series
① Use the screwdriver to loose the screws of the rear panel and then remove the front cover.
①Use 4 screws to secure the HDD
②Put the HDD to the HDD box at the front.
③Pull the HDD knob up when you put the HDD
into the box in case the knob buckle may strike
the front panel.
④Put the knob back after you insert the HDD
to the SATA board.