CP Plus CP-UNR-1xxQ1 Series - About

164
Figure 7-66 Alarm
Please refer to the following sheet for detailed information.
Type
Parameter
Function
Alarm
Type
Video loss
System alarms when video loss occurs.
Motion detection
System alarms when motion detection alarm
occurs,
Disk full
System alarms when disk is full.
Disk error
System alarms when disk error occurs.
Camera masking
System alarms when camera is viciously masking.
External alarm
Alarm input device sends out an alarm.
Offline alarm
NVR local-end offline alarm.
IPC external
alarm
It refers to the on-off alarm signal from the front-end
device and can activate NVR local operation.
IPC offline alarm
System can generate an alarm when the front-end
IPC disconnects with the local NVR.
Operation
Listening alarm
System notifies web when an alarm occurs (you
select from the above event type), and then web
cannotify user.
Video
When an alarm occurs, system auto enables video
monitor.
This function only applies to video detection alarm
(motion detection, video loss and camera masking).
This function is not available in current device.
Prompt
Automatically pops up alarm dialogue box.
Sound pop up
System sends out alarm sound when an alarm
occurs. You can specify as you wish.
Path
Here you can specify alarm sound file.
7.7 About
Click about button, you can view the web information. See Figure 7-67.
Figure 7-67 About