CP Plus CP-UNR-1xxQ1 Series - CP-UNR-3 Xxt2 Series

35
Port Name
Connection
Function
HDMI
High Definition
Media
Interface
/
High definition audio and video signal output
port. It transmits uncompressed high
definition video and multiple-channel data to
the HDMI port of the display device.
VGA
VGA video
output port
/
VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
2.2.7 CP-UNR-3xxT2 Series
The 52 series rear panel is shown as below. See Figure 2-18.
Figure 2-18
Please refer to the following sheet for detailed information.
Port Name
Connector
Function
Power button
/
/
Power on/off button.
Power input
port
/
/
Input AC 220V power.
MIC IN
Audio input port
/
Bidirectional talk input port. It is to receive the
analog audio signal output from the devices such
as mike phone, pickup.
MIC OUT
Audio output port
/
Audio output port. It is to output the analog audio
signal to the devices such as the sound box.
 Bidirectional talk output.
 Audio output on 1-window video monitor.
 Audio output on 1-window video playback.
1-16
Alarm input port
1-16.
I/O port
 There are four groups. The first group is from
port 1 to port 4, the second group is from port
5 to port 8, the third group is from 9 to 12,
and the fourth group is from 13 to 16. They
are to receive the signal from the external
alarm source. There are two types; NO
(normal open)/NC (normal close).
 When your alarm input device is using
external power, please make sure the device
and the NVR have the same ground.
Ground end
Alarm input ground end.
NO1 to NO5
5-ch alarm output
port
 5 groups of alarm output ports. (Group 1：port
NO1～C1,Group 2:port NO2～C2,Group
C1～C5