CP Plus CP-UNR-1xxQ1 Series - CP-UNR-2 Xxq4;Cp-UNR-2 Xxq4 P Series

21
2.1.6 CP-UNR-2xxQ4_ CP-UNR-2xxQ4P Series
The front panel is shown as in Figure 2-7.
Figure 2-7
Please refer to the following sheet for front panel button information.
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up or
shut down NVR.
Assistant
Fn
 One-window monitor mode, click this button to display
assistant function: PTZ control and image color.
 Backspace function: in numeral control or text control,
press it for 1.5 seconds to delete the previous character
before the cursor.
 In motion detection setup, working with Fn and direction
keys to realize setup.
 In text mode, click it to switch between numeral, English
character (small/capitalized) and etc.
 In HDD management interface, you can click it to switch
HDD record information and other information (Menu
prompt)
 Realize other special functions.
USB2.0 port
To connect USB2.0 storage device, USB2.0 mouse, burner and