CP Plus CP-UNR-1xxQ1 Series - Page 30

22
etc.
Power
indication light
Power indication light.
HDD abnormal
indication light
HDD error occurs or HDD capacity is below specified threshold
value, the light becomes red to alert you.
Network
abnormal
indication light
Network error occurs or there is no network connection, the light
becomes red to alert you.
Alarm indicator
light
The light becomes on when an alarm occurred.
2.1.7 CP-UNR-4xxQ8-XU/ CP-UNR-3xxT8 Series
The front panel is shown as in Figure 2-8.
Figure 2-8
Please refer to the following sheet for front panel button information.
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up or
shut down NVR.
Number button
Number 0-9
and etc
 Input Arabic number
 Switch channel
Input number
more than 10
-/--
If you want to input a number more than 10, please click this
button and then input.
Shift

 In textbox, click this button to switch between numeral,
English (Small/Capitalized),donation and etc.
 Enable or disable tour.
Fast play

Various fast speeds and normal playback.
Slow play
Multiple slow play speeds or normal playback.
Play/Pause

 In normal playback click this button to pause playback
 In pause mode, click this button to resume playback.
Reverse/Pause

 In normal playback or pause mode, click this button to
reverse
 playback
 In reverse playback, click this button to pause playback.