CP Plus CP-UNR-1xxQ1 Series - CP-UNR-3 Xxt2;Cp-UNR-3 Xxt2 P Series

16
Record
REC
Manually stop/start recording, working with direction keys
or numeral keys to select the recording channel.
Window switch
Mult
Click it to switch one-window/multiple-window.
USB2.0 port
To connect USB2.0 storage device, USB2.0 mouse,
burner and etc.
Record light
1-16
For 4/8/16 channel device: indication light on means that
the channel is in recording.
Power indication
light
Power
Power indication light.
HDD abnormal
indication light
HDD
HDD error occurs or HDD capacity is below specified
threshold value, the light becomes red to alert you.
Network abnormal
indication light
Net
Network error occurs or there is no network connection,
the light becomes red to alert you.
IR Receiver
IR
It is to receive the signal from the remote control.
2.1.3 CP-UNR-3xxT2_ CP-UNR-3xxT2P Series
The front panel is shown as in Figure 2-3.
Figure 2-3
Please refer to the following sheet for detailed information.
SN
Name
Icon
Function
1
Power button
Press it once to turn on the device.
Press it for a long time to turn off the device (Usually
we do not recommend).
2
System HDD
Indication light
The blue light flashes when system is reading or
writing the system HDD.
In the system HDD, there are device important
configuration file, factory default configuration file,
device initial boot up data.