EasyManua.ls Logo

CP Plus CP-UNR-1xxQ1 Series - Page 25

Default Icon
189 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
3
Alarm indication
light
The alarm indication light becomes on once an alarm
occurred. The alarm includes local alarm, no disk and
etc.
4
Network indication
light
The network indication light is blue and it flashes
when you connect the device to the network.
5
USB2.0 port
Connect to USB2.0 storage device,mouse, burner
and etc.
6
16-HDD slots
/
/
After you remove the front panel, you can see there are 16 HDDs. From the left to the right and
from the top to the bottom, it ranges from 1~4, 5~8, 6~12, 13~16. See Figure 2-4.
You can see there are two indication lights on the HDD bracket.
The power indication light is at the top. The light is yellow after you connected the device to
the power.
The read-write indication light is at the bottom. The blue light flashes when system is reading
or writing the data.
Figure 2-4

Table of Contents

Related product manuals