Please input pre-record value here.
When alarm record or motion detection record occurs, system can
record the several seconds video before activating the record
operation into the file. (Depends on data size).
In Figure 7-23, click set button, you can go to the corresponding
setup interface. See Figure 7-24.
Please set schedule period and then select corresponding record
type: schedule, motion detection, and alarm.
Please select date (Current setup applies to current day by default.
You can draw a circle before the week to apply the setup to the whole
week.)
After complete setup, please go back to Figure 7-23 and then click
save to save current time period setup.
To Next Page
Loading...