Please refer to the following sheet for detailed information.
Select the corresponding channel.
Display the current channel ID. You can also modify the channel ID here.
The device does not support it.
For the main stream, recorded file only contains video by default. You need to
draw a circle here to enable audio function.
For extra stream, you need to draw a circle to select the video first and then
select the audio if necessary.
Main code stream types are D1/HD1/2CIF/CIF/QCIF
Channel 1～16 extra code stream supports CIF/QCIF.
PAL: 1f/s-25f/s；NTSC: 1f/s-30f/s
There are two options: VBR and CBR.
Please note, you can set video quality in VBR mode only.。
The bigger bit value, the better the image quality. Reference bit is an ideal
range for you to set bit rate.
Here you can privacy mask the specified video in the monitor video.
One channel max supports 4 privacy mask zones.
The privacy mask includes two options: Never/monitor. Never: It means do not
enable privacy mask function. Monitor: the privacy mask zone cannot be
viewed in monitor mode.
You can enable this function so that system overlays time information in video
window.
You can enable this function so that system overlays channel information in
video window.
To Next Page
Loading...