Figure 7-41 Detect
Please refer to the following sheet for detailed information.
Motion detect, video loss and video masking
Select a channel from the dropdown list to set motion detect, video loss and video
masking function.
System supports 6 levels. The sixth level has the highest sensitivity.
Check the box to enable this function.
There are PAL22X18/NTSC22X15 small zones.
Blue area is the detection zone. Right click to view in full screen, click OK
before exit to save the setup.
Here you can set for business day and non-business day.
when an alarm occurred, system enables peripheral alarm device
Select the recording channel (Multiple choices). This channel will be activated
to record when an alarm occurs.
System can send out email to alert you when an alarm occurs.
Here you can enable tour function when an alarm occurs.
Here you can set PTZ movement when an alarm occurs. Such as go to
preset, tour &pattern when there is an alarm.
You need to input capture channel number so that system can backup
snapshot file when an alarm occurs.
To Next Page
Loading...