EasyManua.ls Logo

CP Plus CP-UNR-1xxQ1 Series - Page 37

Default Icon
189 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
The CP-UNR-2xxQ2P rear panel is shown as below. See Figure 2-14.
Figure 2-14
Please refer to the following sheet for detailed information.
Port Name
Connection
Function
USB2.0
USB2.0 port.
Connect to USB2.0 mouse.
NET
Network port
10M/100M/1000Mbps self-adaptive Ethernet
port. Connect to the network cable.
HDMI
High Definition
Media
Interface
High definition audio and video signal output
port. It transmits uncompressed high
definition video and multiple-channel data to
the HDMI port of the display device.
VGA
VGA video
output port
VGA
VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
1-3
Alarm input
port 1-3.
I/O port
Alarm input port.
When your alarm input device is using
external power, please make sure the
device and the NVR have the same
ground.
Alarm input
port ground
end
Alarm input ground end.
NO
Alarm output
port
3 groups of alarm output ports. (Group 1
port NO1C1,Group 2:port NO2

Table of Contents

Related product manuals