Gryphon™ Coin Changer User Guide
© 2021 Crane Payment Innovations.
All rights reserved.
• Inventory Keys A - F: The default setting allows the user to quickly dispense coins
from the A - F tubes by pressing the corresponding MMI button. This section allows
you to disable that functi
on.
• Settings: Save the current settings or restore the original settings.
• D
isplay Contrast: Adjust the contrast of the MMI display. Press Up to increas
e
c
ontrast and Down to decrease contras
t.
• Idle S
creen Amount: Set the information displayed on the idle screen. Selec
t
betw
een:
o Inventory – Displays the full amount of money in the cassette, including
the
safe coins. Safe coins are the minimum number of coins that need to be in the
tubes
to continue normal operati
on.
o P
ayable – Displays the total amount of money in the cassette, minus the s
afe
c
oins.
o Cashbox – Displays the amount routed to the cashbox.
o Nothing – No information displayed.
Error Log
Select View to scroll through a list of recent errors and select Reset to erase the error log.
Test
• Auto Self-Tests: Runs an automated test of all motor functions and displays pass/fail
results.
• M
anual Self-Tests: Allows you to test specific functions of the coin changer. Scroll t
o
s
elect the test, and then click
START to perform the test.
• G
ates: Test the coin changer’s routing mechanisms by selecting All Gates or choos
e
a s
pecific gate to test. Opening the MMI will not interrupt the test and will allow y
ou to
view the performance of the gate as it operates.
• Inf
o: Quickly review information about the coin changer, including current cass
ette
i
nformation and firmware versions
.
Lang
uage
Scroll to select your preferred language.
To Next Page
Loading...
