To Next PageTo Next Page
Need help?Do you have a question about the CPS MAXXAIR MX3030 and is the answer not in the manual?
General| Brand | CPS |
|---|---|
| Model | MAXXAIR MX3030 |
| Category | Service Equipment |
| Language | English |
Machine alerts user to high pressure condition and stops compressor.
Lists certifications, standards, and patents for the MX3030 machine.
General introduction to the MX3030 Refrigerant Management Center.
Lists optional accessories like Heater Blanket and CarSmart A/C Inspector.
Details specifications for the vacuum pump.
Details specifications for the refrigerant scale.
Displays the main operational screen with selectable functions.
Explains the function of various touch keys and information icons.
Describes how to use the Print Key for reports.
Explains how to access the HELP menu for system assistance.
Accesses Machine Upkeep screen for Setup and Maintenance functions.
Lists functions available under Setup, like Units of Measure, Language, etc.
Lists functions available under Maintenance, like Filter Change, Software Upgrade.
Explains the process for flushing service hoses on hybrid vehicles.
Instructions for changing machine language.
How to set display units for Pressure, Temp, Weight, and Altitude.
Procedure to set empty tank and refrigerant weights.
Configure settings for tracking job data and warranty codes.
Details Bluetooth LE and Wi-Fi capabilities.
Connect to Wi-Fi devices like printers and email reports.
Procedure to set the machine's date and time.
Steps for registering the machine online for warranty.
Procedure to enter shop name, address, and phone number.
How to select SAE or International operating standards.
Guide to changing the filter/dryer and its reset code.
Guidelines for when to change vacuum pump oil.
Step-by-step instructions for changing vacuum pump oil.
Information about the recommended vacuum pump oil.
Options for scale calibration, check, and zeroing.
Procedure to tare or zero the refrigerant scale.
Steps to zero the internal pressure transducer.
Instructions for updating the MX3030 system software via USB.
Guide to recalibrating the touch screen display.
How to use the TMX2P probe for temperature measurements.
Procedure for flushing service hoses.
Instructions for adding and managing job data.
Explains various error codes and their potential causes/solutions.
Lists part numbers and descriptions for replacement components.
