62
(3) “3 Recover” menu, the manufacturer’s parameter default value can be
restored when the inverter is not in operation mode. Otherwise, a
“FaultOperated” will be prompted.
(4) In “4 ClrErrRecd” menu, history information of the faults can be cleared.
A confirmation is required to clear the records.
→1 SysPara.
2 Restart
3 Recover
4 ClrErrRecd
GridV.Max（V）
→ 528
GridVmaxTripT (S)
1.80
Pls Input Pwd
****
PwdError
Pls Input Again
GridV.Min（V）
→ 422
GridVminTripT (S)
1.80
GridF.Min(Hz)
→ 59.30
GridFTripT (S)
0.08
Initialization？
Recovering..
Success！
Failure！
Are You Sure？
Restarting...
Success!
Failure!
FaultOperated
FaultOperated
Clear Errors?
Success!
Figure 5-18 System parameter setup
To Next Page
Loading...
