CPS SC Series - Page 65

61
15.
V.RecoverT (S)
Grid voltage recover time
{0.08, 300, 600.00}
16.
F.MaxRecover
Max. grid frequency
recover value
{50.00, 60.4, 62.00}
17.
F.MinRecover
Min. grid frequency
recover value
{58.00, 59.4, 60.00}
18.
F.RecoverT
Grid frequency recover
time
{0.08, 300, 600.00}
19.
PVStartVol (V)
PV startup voltage
{150.0, 295, 310.0}
20.
SoftStep (KW/S)
Soft step
{0.1, 0.1, 1}
(2) “2 Restart” menu. If an internal fault shutdown happens, a severe fault
has occurred inside the inverter. The user may perform a force restart once in
this menu if the user needs to restart the inverter.
INSTRUCTION:
The function of active power derating and reactive power
compensation is optional. For detailed information, you may call our
after-sales service center.
INSTRUCTION:
The “Restart” function is effective only when the fault “IntFaultA~O” in
the troubleshooting table occurs. The inverter may restore to normal
operation automatically if alarm or protection faults occur. This
function will not respond when the inverter is in operation mode and
a “FaultOperated” alarm interface will be indicated.