©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
65
User Manual / AER2100
4/19/16
DSCP (DiffServ) Tag
putting the value in the DSCP header of each IP
value of ‘0’ to clear the existing DSCP value in the
packet header.
DSCP Tagging is sometimes used so that other
networking equipment, upstream or post-NAT,
opposed to IP addresses or ports.
This setting is optional.
Upload Bandwidth
Enable Upload QoS: (Default: Enabled.) Deselect
restrictions with this queue.
Borrow Spare Bandwidth: (Default: Enabled.)
When this is enabled, the interfaces/protocols associated with this rule will borrow unused bandwidth from
Upload Bandwidth: This is the percentage of the connected WAN upload bandwidth that will be reserved for
their share.
Upload Priority
• Lowest
• Lower
• Below Normal
• Normal
• Above Normal
• High
• Higher
• Highest
Click Next to continue to the next page.
Download Bandwidth
Enable Download QoS
this selected to include download restrictions with this queue.
Borrow Spare Bandwidth: (Default: Enabled.) When this is enabled, the interfaces/protocols associated with
Download Bandwidth: This is the percentage of the connected WAN upload bandwidth that will be reserved for
their share.
To Next Page
Loading...
