©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
73
User Manual / AER2100
4/19/16
CLIENT DATA USAGE
Enable Client Data
Usage Monitoring Service to begin tracking this
information. This data is not retained between
router reboots.
For each client this shows: Name, IP address, MAC
address, amount of data uploaded (MB), amount of
The names that are shown are received during a DHCP exchange. If a client disconnects and reconnects with a
Pressing Reset Statistics will restart all counters at 0.
NHRP
Next Hop Resolution Protocol is a protocol
used to discover addresses of clients on
Non-Broadcast Multiple Access (NBMA)
networks. It is used to create next-
generation VPN technologies that allow
shortcutting between spokes. With NHRP,
requiring an intermediate hop.
NOTESYSTEM >
Administration > Feature Licenses to enable this feature.
• Name: Name of the GRE tunnel that NHRP will use
• Protocol Address/Prex: GRE tunnel endpoint mapping that NHRP associates with the NBMA server
• NBMA Address
• Flags:
• SD: Shortcut-Destination
• N: Non-Caching
• S: Shortcut
• R: Redirect
Click Add to create a new NHRP interface.
• Enabled: Enable or disable the interface.
• Name: Give the interface a unique name that matches the mGRE (multipoint GRE) tunnel. Select from
• Peer Authentication: Embeds the secret plaintext password to outgoing NHRP packets. Incoming NHRP
packets on this interface are discarded unless this password is present. Max length: eight characters.
To Next Page
Loading...
