Cradlepoint AER2100 - Page 72

©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
72
User Manual / AER2100
4/19/16


EXAMPLE

• Source IP Address: 192.168.10.0
• Source Netmask: 255.255.255.0
Failover
interrupted, the router will fail over to another available WAN device. Deselect this option to restrict this

When Condition Value
Port Is USB Port 1
 Is not WiMax
• When:
• Port
2”).
• Manufacturer
• Model
• Type
• Serial Number
• MAC Address – Select from a dropdown list of attached devices.
• Unique ID
to the router.
• Condition
statement.
• Value
the value.
Load Balance Algorithm
dropdown options:
• Round-Robin
• Rate: Distribute load based on the current upload and download rates. A WAN device’s upload and
download bandwidth values can be set in CONNECTION MANAGER.
• Spillover
the most available bandwidth. The estimated bandwidth rate is based on a combination of the upload and

• Data Usage
keep data usage between interfaces at a similar percentage of the assigned data cap in the data usage rule


“Use with Load Balancing” checkbox in the data usage rule editor.