Craftex CX205 User Manual

6
MODEL CX206 – 12” LEFT TILT TABLE SAW
As part of the growing line of Craftex woodworking equipment, we are proud to offer CX206 -
12” Left Tilt Table Saw. The Craftex name guarantees Craft Excellence. By following the
instructions and procedures laid out in this owner’s manual, you will receive years of excellent
service and satisfaction. The CX206 is a professional tool and like all power tools, proper care
and safety procedures should be adhered to.
Motor ..............................................3-HP, 220-V, Single Phase TEFC Motor
Blade Guard ...................................Riving Knife, CSA Approved & UL897 Compliant
Mitre Gauge....................................T-Slot Mitre Gauge
Drive System ..................................Triple “V” Belt Drive
Rip Fence .......................................“T” Type Heavy Duty Rip Fence (Cam Lever) w/Optical Cursor
Arbor Extension..............................Included
Arbor Tilt.........................................Left Tilting
Table Size.......................................30” x 48” (with Extension Wings)
Blade Speed...................................4,140 RPM
Floor to Table Height......................35”
Maximum Depth of Cut @ 90 °.......4”
Maximum Depth of Cut @ 45 °.......2 5/8”
Dust Collection Ports......................One 4” Port
Base Dimensions............................ 30” x 48”
Blade Size ......................................12”
Approximate Weight ....................... 280 Kgs
CX206–12” Left Tilt Table Saw
FEATURES

Craftex CX205 Specifications

General

Brand	Craftex
Model	CX205
Category	Saw
Language	English