Items included with the CompuCarve System
A) CompuCarve Machine
B) CarveWright Software CD
C) Operation Manual
D) CarveWright Memory Card Programmer
E) CarveWright Memory Card
F) 1/16" Diameter Tip Tapered Carving Bit with Bit Adapter
G) 1/8" Diameter Cutting Bit with Bit Adapter
H) 3/32" Allen Wrench
I) Muffler Dust Collector
J) Bit removal Tool
K) Crank Handle Ball and Shoulder Bolt
Items Included With the CompuCarve System
\,i?,,
//
/iY //
FIGURE 1: CARVEWRIGHT
MEMORY CARD PROGRAMMER
FIGURE2: MUFFLERAND DUST
COLLECTOR BAG
FIGURE 3:
CARVEWRIGHT
MEMORY CARD
/
FIGURE4: 1/8"
CUTTING BIT WITH
ADAPTER
FIGURE 5" 1/16"
CARVING BIT WITH
ADAPTER
FIGURE 6: 3/32"
ALLEN WRENCH
FIGURE7: BIT
REMOVAL TOOL
Sears, Roebuck and Co. CompuCarve TM System (Rev 1.13) 01/06/07 9
To Next Page
Loading...
Need help?
General
