Page 31
SNACK/REFRESHMENT CENTER PROGRAMMING GUIDE
1670002
April, 1999
SELECT A FREEVEND MESSAGE
1. Press , then press until the display shows
FREEVEND
XX
. "XX" represents the current message number selected for the
message that displays when the machine is in the freevend mode. Two
dashes mean that the factory-set message is selected.
2. To select a message, just press the corresponding number (1 through 8).
To display the factory-set message, press 0.
3. The selected message (except the factory-set message) can be edited.
To do this, press and follow the procedure given in EDIT CUS-
TOM MESSAGES.
4. Press until you have left the function.
To Next Page
Loading...
