Creality CR-10 Series User Manual

09/
First Printing
1.Slicing
2.Printing
Insert the TF card→ Print → Select the file to be printed.
Open the software→Load→Select the file→Wait for slicing to finish ,and save the gcode file to TF card.

Creality CR-10 Series Specifications

General

Build Volume	300 x 300 x 400 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD Card, USB
Bed Temperature	Up to 100°C
Power Supply	110V/220V, 360W
Nozzle Diameter	0.4 mm (can be replaced with other sizes)
Supported Materials	PLA, ABS, PETG, TPU
Display	LCD
Frame Structure	Aluminum frame