Creality Sermoon V1

0104
1.3 Device specif ications
Basic Parameters
Model Sermoon V1 | Sermoon V1 Pro
Modeling size 175x175x165 mm
Modeling technology FDM
Number of nozzles 1
Nozzle diameter 0.4 mm (Standard)
Accuracy ± 0.1 mm
Print materials 1.75 mm PLA / ABS / PETG
Supported slicing f ile formats STL / OBJ / AMF
Power rating 150W
HotBed temperature ≤ 80℃
Nozzle temperature ≤ 250℃
Ambient temperature 10℃ - 30℃
Power Loss Recovery Yes
Filament detection Yes
Supported slicing software Creality Slicer, Repetier-Host, Cura, Simplify3D
Printing methods Locally via SD card or cloud printing via Wi-Fi
Power specifications 100-120Vac 200-240Vac 50/60Hz
Operating systems Windows XP / Vista/ 7 / 10/ MAC / Linux
Printing speed ≤ 150 mm/s, normally between 30-60 mm/s
Open door sensor Comes standard with the Pro version
Camera Comes standard with the Pro version