Creality Sermoon V1 User Manual

01
>> >>>> >>
16
3. Notes and Daily Maintenance
3.1 Feed out and feed in f ilaments
Note: The above interface is for reference only. The actual UI may vary.
Once the specif ic temperature has been reached and f ilaments are withdrawing,
please immediately pull out the f ilaments. Otherwise, the f ilaments may jam up
once it has cooled down.
225 225
100 70.68
69 70 225 225
100 70.68
69 70 225 225
100 70.68
69 70

Creality Sermoon V1 Specifications

General

Build Volume	175 x 175 x 165 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	Wi-Fi, USB
Display	4.3-inch Touch Screen
Leveling	Automatic leveling
Frame Material	Metal
Printing Technology	FDM
Heated Bed	Yes
Bed Temperature	Up to 80°C
Nozzle Temperature	Up to 250°C
Machine Dimensions	400 x 380 x 430 mm
Machine Weight	11.5 kg
Supported Filaments	PLA, ABS, TPU
Extruder Type	Single Extruder