CreatBot F430 - Main Menu Interactive Functions

Main Menu
- 11 -
Printer Operation
- 10 -
Printer Operation
Main Menu
bed up
pause
stop
bed down
preheat
resume
Cool down
Move axis
Filament menu
Setting Open U-disk
USB unavailable
210℃
200.0℃
45℃
40.0℃
Touch and set up the temp of the nozzle.
Preset nozzle temperature
Current nozzle temperature
45℃
40.0℃
Touch and set up the temp of the nozzle.
Preset nozzle temperature
210℃
200.0℃
Touch and set up the temp of the
23℃
23℃
Touch and set up the temp of the nozzle.
210℃
210℃
210℃
200.0℃
Touch and set up the temp of the hotbed.
Current platform temperature
Preset platform temperature
210℃
200.0℃
Touch and set up the temp of the
45℃
45℃
Current nozzle temperature
Touch and set up the temp of the Chamber.
Current Chamber temperature
Preset Chamber temperature
210℃
200.0℃
Touch and set up the temp of the
23℃
23℃