- 19 -
Printer Operation
Setting menu
sink fan speed (range:1-100)
cooling fan speed (range:1-100)
Air filter fan speed(range:1-100)
head temperature (range:0-420)
hotbed temperature (range:0-140)
chamber temperature (range:0-70)
- 18 -
Setting menu
When the probe is extended for detection,
the relative height difference between the
probe and the nozzle(range-20-20mm)。
Turn on or off the auto leveling function.
Probe measuring several points on the
platform to obtain height information.
Close auto leveling function after this print
height(range:0-100mm).
To Next Page
Loading...
