Modem Installation 2-11
Installing Drivers in Windows NT 4.0
Before you begin, please have the
Software and Modem Installation
CD-ROM ready, which will be required to install the modem drivers.
1st Method
1. Power on your computer and insert the
Software and Modem
Installation
CD-ROM into the CD-ROM drive. Once you are
into the Windows environment, select the
button at the bottom left corner of your screen. Select Settings,
and then select Control Panel.
2. Once Control Panel is open, similar to
Figure 2-13,
double-click the Modems icon to open it.
Figure 2-13: Windows Control Panel
To Next Page
Loading...
