Product Manual — Doc. 9324A IV-SAM-VXP-1B and IV-SAM-VXS-1B • 41
Camera Setup Tool
The Automate VXsystem provides a Camera Setup tool that allows microphones to be paired
with their corresponding camera shot for each configuration. The tool also simplifies changing
any camera presets.
To access the camera setup tool, select the camera icon within the settings page.
Camera Icon Selection
The Camera Setup page is displayed.
The following controls are provided. Use these controls to configure any microphones that are
used in this configuration.
l
Use the drop-down menu at the top of the page to change the room configuration.
l
Use the drop-down menu under Camera Setup to select a microphone that will be paired
to the camera preset.
To Next Page
Need help?
General